Canon EOS 50d

Aegis Multi-coated LCD Screen Protector for Canon 40D, 50D, Canon D5 Mark II, 1D/1DS Mark III and Sony A900. Made from tempered Schott glass from Germany. Efficient, effective 12-layer anti-reflective coating……..
Readmore

Technical Details

– 67.8×54.54mm
– Includes lint-free cleaning cloth
– Also fits Canon 5D Mark II, 40D, 50D, 1DS Mark III; and Sony A900
See more technical details

(more…)

Upgraded Flash Speedlite YN-468, it’s designed for Canon DSLR Camera. The main difference between YN-468 and YN-467 is that YN-468 has the LED Display, Multi Strobeflash function, and can set the focus position of the light head manually, more professional and higher efficiency. Function: a), TTL mode, the metering system of this camera will detect flash illumination reflected back from the object so as to automatically control flash output in this mode. In this E-TTL mode, you can also make compensation of flash brightness with the ” Output contral knob” within the range of ±3 ev, with the precision of 1/3 ev. (The compensation value can be added to the compensation value set on the camera.) b), Auto Zoom 1),The flash speedlite will move forward and backward with the changes of lens focus to suit different illumintion zones when it is mounted on the camera which supports E-TTL Function, the zoom range is 24mm – 85mm. 2), You also can set the focus position for the light head manually by pressing the mode swithc button + Power button. c), Multi Mode, it’s the strobeflash mode, the flash light will output the power, flash frequency and time flash you have set. d), M mode, you can set flash luminance as per your favorite, luminance level will be displayed by luminance indicator. When taking photos, you only require setting the flash luminance, adjust the camera and press the shutter, the flash light will flash under the camera synchronous signal. e), S1 Mode, it will work with the first work of the master flash synchronously in this mode, with the result consistent with the use of radio slave. f), S2 Mode, it can support the master flash in TTL mode. In particular, if S1 mode can not have correct and synchronous flash with the inbuilt flash, you can try to use S2 mode…….
Readmore

Technical Details

– 1. Multi-Lamp Lighting Application
– 2. Exposure Bracketing (FEB)
– 3. Use Wide-angle Diffuser
– 4. Rear-curtain Sync
– 5. FE Lock (This function can only be available when your camera supports it, for the setting of FE lick, refer to your camera manaul)
See more technical details

(more…)

GGS LCD screen protector is using ultra thin optical glass and special processing, it is high transparency, anti-scrape, anti-bump, anti-aging and easy to install.Features:Easy to Install:How to remove: * No trimming required, fit directly on your LCD screen. * Just clean your LCD screen first, peel off the white back of the protector to stick, Done! * Easy to install and bubbles free, unlike plastic protector which always gives you bubbles between the protector and the screen. * No adhesive backing at the LCD screen, only at the border of the film for clearness. * Can be removed and reinstall, without leaving ugly residual on your LCD screen. * Use a thin plastic business card or similar item (the plastic package of this protector could be used as the tool) to slide around the edge of the screen to remove it. * Do not pull or use fingernails to lift the four corners of the screen protector as it may break the glass protector, hurt your fingers and/or damage the camera……..
Readmore

Technical Details

– It is rigid and made of optical glass material, which achieves more than 90% of transmittance (high
– Only 0.5mm thick with 6 layers of coatings and UV Protection.
– Optical glass strengthened through special crafting process.
– Prevent scratches, collisions and moderate impact to the LCD screen.
– The protector is reusable.
See more technical details

(more…)

GGS LCD screen protector is using ultra thin optical glass and special processing, it is high transparency, anti-scrape, anti-bump, anti-aging and easy to install.

Features:

Easy to Install:

How to remove:

* No trimming required, fit directly on your LCD screen. * Just clean your LCD screen first, peel off the white back of the protector to stick, Done! * Easy to install and bubbles free, unlike plastic protector which always gives you bubbles between the protector and the screen. * No adhesive backing at the LCD screen, only at the border of the film for clearness. * Can be removed and reinstall, without leaving ugly residual on your LCD screen. * Use a thin plastic business card or similar item (the plastic package of this protector could be used as the tool) to slide around the edge of the screen to remove it. * Do not pull or use fingernails to lift the four corners of the screen protector as it may break the glass protector, hurt your fingers and/or damage the camera……..
Readmore

Technical Details

– It is rigid and made of optical glass material, which achieves more than 90% of transmittance (high
– Only 0.5mm thick with 6 layers of coatings and UV Protection.
– Optical glass strengthened through special crafting process.
– Prevent scratches, collisions and moderate impact to the LCD screen.
– The protector is reusable.
See more technical details

(more…)

GGS LCD screen protector is using ultra thin optical glass and special processing, it is high transparency, anti-scrape, anti-bump, anti-aging and easy to install.

Features:

Easy to Install:

How to remove:

* No trimming required, fit directly on your LCD screen. * Just clean your LCD screen first, peel off the white back of the protector to stick, Done! * Easy to install and bubbles free, unlike plastic protector which always gives you bubbles between the protector and the screen. * No adhesive backing at the LCD screen, only at the border of the film for clearness. * Can be removed and reinstall, without leaving ugly residual on your LCD screen. * Use a thin plastic business card or similar item (the plastic package of this protector could be used as the tool) to slide around the edge of the screen to remove it. * Do not pull or use fingernails to lift the four corners of the screen protector as it may break the glass protector, hurt your fingers and/or damage the camera……..
Readmore

Technical Details

– It is rigid and made of optical glass material, which achieves more than 90% of transmittance (high
– Only 0.5mm thick with 6 layers of coatings and UV Protection.
– Optical glass strengthened through special crafting process.
– Prevent scratches, collisions and moderate impact to the LCD screen.
– The protector is reusable.
See more technical details

(more…)